Carb problems pt.2

[Doug Jacobsma <big_jake57@xxxxxxxxxxx>]

Hi all;
I posted a little while back about a squeal comming from my AVS Carter 
carb on my '63s 383.  Sean B. mentioned carb to intake seal, and thats 
what it is.  I can seal the carb with the thin gasket, but when using 
the thick fiber gasket I get the leak.  I know I used to use the thick 
gasket all the time on other engines and dont remember having this 
problem.  I put this thing together about 25 years ago so I dont 
remember the reason for the thick gasket, although the linkages and such 
do seam to line up better with the extra height.
This is a '69 383, cast iron intake and '69 Carter AVS.  Just put a kit 
in the carb, and now cant get the carb to seal.  
I'm looking for ideas on succesfully sealing, or do I need the thick 
gasket, or is there a better spacer combo?  
Thanx for any advice

Jake
'63 Sport Fury 'vert


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.