RE: Centerforce Clutch problem

[ledman_70@xxxxxxxxxxx]

I spent $49 from Brewers to REPLACE the missing overcenter spring in my 
Polara, but the pedal still rests about 2" lower than the brake. Why do 
you guys remove the spring? I am also interested in this post because 
I'm replacing my Zoom clutch this winter and haven't decided which way 
to go yet. My clutch only has 1500 miles on it, but I can spin the 
clutch out slamming 2nd gear. I can launch in 2nd burning the tires, but 
it won't hold if I shift it hard. I think it's because Zoom clutches are 
junk. What do you guys recommend for a 64 Polara, 426, with 3:91 gears 
and 28" tall tires?
 
Brian Schlump wrote:
> 
> 
> Dave Walters wrote:
> > 
> > 
> Dave, 
> 
> My car had a 3 finger Hayes clutch in it when I bought it, and it had no 
> 
> over center spring in it then, or now.
> 
> 
>  
> > Out of curiosity,did you remover the over center spring? Not that it's 
> > causing your problem.
> > 
> >   Dave Walters
> >   Denver, Co.
> > 
> >   
> 
> 
> 
> '64 Belvedere
> Davenport, Iowa
> 
> "The difference between ordinary and extraordinary is that little 
> extra."



Jeff Adams
64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.