Re: 360 for a '64 Valiant
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 360 for a '64 Valiant



We had a 360 in a 65 Cuda several years ago. You have to use a
properly balanced torque converter. The 360 is balanced differently
than the 273. Also, you will need a car oil pan and pickup tube, the
sump is in the wrong place on the truck pan.

Lee Sumpter

On 12/20/07, Don H. <mopar4me@xxxxxxxxxxx> wrote:
>
> Great swap!  I'm currently rebuilding a 70 340 to go in my 65 Dart wagon.
> I'll be using a rebuilt 904 (not original to the car though) as well.  You
> see these kind of swaps (as well as big small block stroker swaps) all the
> time over at www.forabodiesonly.com.
> Don----- Original Message -----
> From: "J. O." <JJO1967@xxxxxxxxxxx>
> To: "mopar" <1962to1965mopars@xxxxxxxxxx>
> Sent: Wednesday, December 19, 2007 10:23 PM
> Subject: 360 for a '64 Valiant
>
>
> >
> >
> >
> > I found an ad for a 360 engine needing head gaskets, an intake and carb in
> > order to run.
> > Said it is out of a '78 Ramcharger.
> >
> > Could this be a good choice for a swap? Currently have a 273 in the
> > Valiant.
> > I suppose my automatic (904 T-Flite?) would not be the best choice for a
> > bigger V8.
> >
> > Might the heads be smoggers, and undesirable? I was reading on Allpar
> > today about just this kind of thing, but don't remember too many
> > specifics.
> >
> > TIA
> > Jim Ozolins
> >
> > _________________________________________________________________
> > Get the power of Windows + Web with the new Windows Live.
> > http://www.windowslive.com?ocid=TXT_TAGHM_Wave2_powerofwindows_122007
> > --
> > [Non-text portions of this message have been removed]
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person --
> > directly to that person.  I.e., send parts/car transactions and
> > negotiations as well as other personal messages only to the intended
> > recipient, not to the Clubhouse public address. This practice will protect
> > your privacy, reduce the total volume of mail and fine tune the content
> > signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> >
> >
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>


-- 
Lee Sumpter


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.