RE: dirty arm rest pads

[v8magic@xxxxxxxxxxxxx]

Many years ago, I was shown a dirt cheap way to easily clean white walls 
without chemicals. I have used it many times since. It involves gently 
rubbing the dirty area with a VERY smooth, flat river rock about the 
size of a fifty cent piece or a silver dollar. I always use water to aid 
the process. Laugh if you want, but it works.

I have never used it on dirty armrests, but it might be worth a try.

Bob in Sacramento


Dan McCormack wrote:
> 
> Sean I've always found that Westley's Whitewall Cleaner (Bleachwhite) 
> and a 
> stiff brush works great for cleaning really dirty vinyl but make sure 
> you 
> rinse it good afterwards. Then put on a preservative and my favorite for 
> 
> that is Vinylex by Lexol. Actually the Vinylex is a cleaner too and 
> works 
> great for restoring faded black gauge faces.
> 
> Dan
> 
> 
> ----- Original Message ----- 
> From: "Sean B" <polecat2@xxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Saturday, April 12, 2008 11:42 PM
> Subject: dirty arm rest pads
> 
> 
> >
> > What's the best way to clean nasty dirty arm rest pads?  They are out of
> > the car.
> >
> > Thanks,
> >
> > Sean
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.