RE: What's with the wire?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: What's with the wire?



Hi Bill,

The wire is likely left over from the casting of the heads.  No big 
deal.  Leave them or take them out.

The rocker shaft slides out of the head and each rocker arm goes on 
individually.  You remove the shaft by pulling the small pin on one of 
the rocker shaft journals.  As you slide the rocker shaft out, the 
rockers and spacer springs will come off.  

Keep track of the order and shoot photos of the heads for reference.

K.

Bill Maurits wrote:
> 
> Apparently I forgot how to type...I'll try this again...
> 
> I was pulling my extra poly apart today and when I got the intake off,
> it looks like there is a wire running through the coolant jacket of
> each head. What in the world is this?
> 
> Bill M
> 65 Coronet 500 'vert



Kevin R. Merkley
Thunder Bay, Ontario
64 Dodge 440 2dr HT (Cdn)
64 Dodge Polara 500 Convertible (Cdn)


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.