Re: Pre 66 727 TF

[Marcus Edell <marcusedell@xxxxxxxxxxx>]

Thanks,I was wondring the same thing..
--
Marcus"Hot Rod"Edell-The RevTones www.myspace.com/revtones  www.revtones.net  

 -------------- Original message ----------------------
From: spigot2039@xxxxxxxxxxx
> 
> Marcus is working with a big block motor, Gary, not a Poly. Are you saying to 
> use the poly 318 converter with a big block?
> 
> Thanks,
> Gary H.
> 
> -----Original Message-----
>  
> >Yes.  You can have a higher stall through the fin adjustment; usually you 
> >can get around 2500stall which is where you want to be for a street/strip 
> >Poly with a 264 cam; just enough to build off the line torque.
> >
> >Gary Pavlovich
> >----- Original Message ----- 
>  
>  
> >> What?? The poly engine Torque Converter will make a higher Stall? How much 
> >> Higher?
> >>
> >> --
> >> Marcus"Hot Rod"Edell-The RevTones www.myspace.com/revtones  
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly 
> to that person.  I.e., send parts/car transactions and negotiations as well as 
> other personal messages only to the intended recipient, not to the Clubhouse 
> public address. This practice will protect your privacy, reduce the total volume 
> of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.