RE: sport fury 1962 denmark

[Bill <hemirr@xxxxxxxxxxx>]

Just wanted to mention that as stated the K-frame is one of a kind for '62 only, but the '63-'65 engine brackets and rubber mounts will work as long as you have the lower brackets that bolted to the K-frame in '62.  These brackets present their upper surface with the required two bolt holes and correct angle to accept the same mounts as '63-'65.  The lower brackets are the same pieces for the 318 and the 361/413 engines.  Although the engine is not present, if you have an angled bracket that bolts to the K-frame on each side with one vertical stud and nut, the '63-'65 mounts will work on those brackets.  Or, check the engine if you have it and the mounts are on it, those lower brackets may be still there.  Basically, beginning in '63 they just made it all one piece integral with the K-frame.Bill & Kathi Parker, South Central Indiana'60 Chrysler Saratoga kustom; '62 Plymouth Max Wedge; '64 Dart convertible; '65 Barracuda \6; '65 Imperial; '68 Barracuda FB 340-S; '69 Barracuda FB now 360; '70 Challenger now 440; '72 Cuda '340
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.