Re: Do you suppose ???
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Do you suppose ???




Rich,

You were supposed to fix that linkage problem AFTER you sandbagged the competition.
Every "bow-tie" deserves a sucker punch.

Gary Pavlovich
----- Original Message ----- From: "Rich Kinsley" <rlkinsley@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, May 21, 2008 6:51 PM
Subject: Do you suppose ???





Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies

After installing the new plywood spacers on my carbs I had a problem
with the old throttle bracket as it wasn't positioned the same due to
the increased height. I wasn't getting full throttle and it was pulling
sideways a bit on the cable. So I got the Lokar Edelbrock throttle
bracket. It is perfect! Everything is lined up right on! But I still can
only get about 3/4 throttle at best. My foot feed is right down against
the carpet which is at least an inch thick.

I wonder if my lazy topend could've been that I wasn't running full
throttle? Don D mentioned this before with Eddy's but when I would open
them by hand it was fine. Do you suppose this has been an issue I didn't
recognize before? Geez, how dumb.


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.




----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.