RE: Windshield Wiper arm removal

[Paul Lennemann <pjlenn@xxxxxxxxx>]

Jimmy Peavy wrote:
> 
> That's correct!
> 
> spigot2039@xxxxxxxxxxx wrote:
> 
> >Then it seems one way I recall: you loosen the bolt and put a piece of 
> >wood to protect the car's paint; then pry off the arm with a 
> >screwdriver. You press against the wood and various parts of the 
> >underside of the wiper arm where it connects to the stud coming out of 
> >the cowl, using the screwdriver like a lever.
> >
> >Thanks,
> >Gary H.
> >
> >  
> >
> 
> 
Keep in mind that you're also fighting against the pressure of the 
spring that holds the wiper arm against the glass.  I would start prying 
(as described by Gary)on the side opposite the arm.


Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.