Re: Engine troubleshooting
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Engine troubleshooting



One of my torque converter bolts was indeed loose - tightened them all
up and the noise disappeared!

Thanks for the tip!

On Thu, Jun 5, 2008 at 6:06 PM,  <chymar01@xxxxxxxxxxx> wrote:
>
> another thing to check for is loose torque converter bolts. I had that happen once.
>
> Mark
>
>
>  -------------- Original message ----------------------
> From: Brian Safford <hzf9vv@xxxxxxxxx>
>> My Poly is making a rather loud clicking noise that seems to be coming
>> from the lower end, but is a bit hard to pinpoint.
>>
>> It gets faster as the engine revs and happens whether the transmission
>> is in park, neutral or in gear.
>>
>> I've heard and fixed tappet noise before and this doesn't sound like that does.
>>
>> I'm prepared to pull the motor and start looking for the root cause
>> but thought I would post this and see if anyone has any words of
>> wisdom.
>>
>> As always, you folks are the best and I am thankful for any help I receive.
>>
>> Regards,
>> Brian Safford
>> '62 Dart 440 / Poly / 413 block and crank that are clean and ready to go!
>
>
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.