RE: oil pans

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

bt6t4@xxxxxxxxx wrote:
> 
> I bought my pan through Mopar Perf. The part # is 5007807.It's a center 
> sump pan Paul. To double check,call John Cambridge at Baxter Dodge 
> parts. I know him well and he's our "old car" guy connection. He can 
> verify if it would fit your 63.
> 
> George
> 
> 
> --- On Fri, 8/1/08, Paul Lennemann <pjlenn@xxxxxxxxx> wrote:
> 
> > From: Paul Lennemann <pjlenn@xxxxxxxxx>
> > Subject: oil pans
> > To: 1962to1965mopars@xxxxxxxxxx
> > Date: Friday, August 1, 2008, 1:48 PM
> > Sounds like the machinist is getting close to finishing my
> > engine.  The 
> > oil pan that was on it was a home made deep sump affair and
> > he noticed 
> > that the welds on it were seeping water through when
> > cleaning it.  He 
> > says he has a pan that he can buy that is basically a stock
> > pan with a 
> > higher capacity sump for about $100.00.  I know there has
> > been a lot of 
> > conversation on here about different pans.  But of course I
> > didn't pay 
> > all that much attention becasue at the time I didn't
> > need one!  So, 
> > here's the payoff.  What model # Moroso or other pan
> > will fit my 63 "B" 
> > body w/ a 440??  Thanks - 
> > 
> > Paul L.
> > '63 Sport Fury
> > 440/727
=====================================================================

I agree. John is a Mopar pro. I'm sure he can give you the correct 
answers. I'm not overly thrilled with my stock Mopar oil pan though. It 
seems a bit smaller than my original which also had a welded "booboo" in 
it.

Yeah, I'm still here till Monday morning:-)



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.