Re: green bearing questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: green bearing questions



Well, the memory ant going bad on me, all I know is what I physically had in
my car and drove for 10 years after the swap. But, If you say I didn't I
guess I didn't. What other rear end did Chrysler have that was a front load?
And that's what it was!!! Funny, last night at a get together a fellow had a
440 powered Demon and stated that their was NEVER a big block A-Body from
the factory. 
 
This subject really is off topic for the 62 - 65 forum so I am done!! 
 
          
Herb 
 
1963 Sport Fury Convertible 361 
1970 Challenger RT 440 
1999 Durango SLT 5.9 
2006 300-C Heritage 5.7 
2008 SRT-8 Magnum 6.1 
St. Louis, MO. 


-------Original Message------- 
 
From: chymar01@xxxxxxxxxxx 
Date: 08/09/08 00:41:53 
To: 1962to1965mopars@xxxxxxxxxx 
Subject: Re: green bearing questions 
 
Good luck with those photos. 
There was NEVER an A-body 8 3/4 with the 4.5 pattern, I don't care what your
friend bought. 
ALL 4.5 bolt cars were 7.25 or 8.25 rears. Some 73-76 cars even came with
the 4.0 bolt pattern(drum brake cars only). 
With all due respect, your memory is dropping a cylinder on this one. 
 
-------------- Original message ---------------------- 
From: Herb <zephyr9900@xxxxxxxxxxx> 
> 
> Dan; 
> 
> I hate to be this bold but, Auto Hobby Digest is wrong!! Because the car I

> got my parts from was new and I did all the work on it from the day it
left 
> the dealers lot. The night he got the car we pulled the 3:23 pumpkin out &

> put 4:11 pumpkin back in, so I know it was factory 8.75 with 4.5 bolt 
> pattern! I distinctly remember being sooo envious being able to use real 
> wheels. (-; Also a racing friend of mine had a 67 Dart that he did the 
> same swap and if my memory is correct he got his from a 74 360 Demon. Just

> the facts as I know them! Now I am going to have to hit a few junk yards 
> and get photos!! 
> 
>           
> Herb


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.