Re: 13's at last!

[Marcus Edell <marcusedell@xxxxxxxxxxx>]

Still seems high ..what kind of gears are you running?

--
Marcus"Hot Rod"Edell-The RevTones 
www.myspace.com/revtones www.myspace.com/marcuseedell 
www.revtones.net http://youtube.com/watch?v=1oky1CwjfFw 

-------------- Original message -------------- 
From: "Robert (UK)" <r.lane@xxxxxxxxxx> 

> 
> Had our (UK's) version of the Mopar Nationals a couple of weeks ago 
> (just got around to sorting thru some pics!), known as the Mopar 
> EuroNats. Thanks to some unseasonably good weather, ie dry & warm, 
> attendance was up over recent years, and the organisers reckon it was 
> the best attended yet in all its 15 years. 
> 
> Last years event was our 1st time up the 1/4 in the 63, with its rebuilt 
> 'stock-spec' max wedge engine, and we were a bit (understatement) 
> disappointed to only manage mid-14's @ around 98 (lost the timing slips, 
> so cant quote exact times!). That was thru the full MW exh system, with 
> the MW air cleaners on, radials and an erratic line-loc, so slow 60ft 
> times didnt help the e.t's. 
> 
> This time around, we removed the TTI's block-off plates & the air 
> filters (left the base plates on to maybe aid air-flow?), and had 3 runs 
> each on the Sat & Sun. 
> To cut a long story short, my brother started off with no burn-out, 
> flooring it in (and spinning all of) 1st, changing at 5000rpm, and 
> managed a 15.0 & 99. 
> The next day, my last run, after getting the ine-loc to hold enough to 
> get some heat in the BFGs but still easing off the line, changing at 
> 5500 (allowing for 500rpm delay), managed a best of 13.65 @ 104. 
> 
> Still around 1 sec off the pace for a good MW set up, I know, but I feel 
> a lot happier being in the 13's! Biggest improvement will be achieved if 
> we can get the 60ft times down. Best that weekend was 2.19! May invest 
> in some slicks & get the 741 changed for a 742 or 489 for next time out. 
> 
> Just as rewarding tho, was having a few people say how sweet the engine 
> sounded as we approached the top end - praps it was the distinctive max 
> wedge sound i've read about! Cant say I noticed from inside the car, was 
> too busy worrying about going thru the traps in a straight line! 
> 
> Anyway, enough waffle, here's some pics 
> 
> http://s65.photobucket.com/albums/h233/rob426uk/Mopar%20EuroNats%202008%2062-65/ 
> ?albumview=grid 
> 
> 
> You'll have to excuse the odd non-Mopar in there, it may be the Mopar 
> EuroNats, but it is also the biggest muscle car event in the UK. We cant 
> be as choosy as you lot (if we dont fill the place, the owners of the 
> strip will pull the plug & let the Jap/Euro/VW crowd have our weekend)! 
> 
> Robert 
> 63 Polara 500 
> England 
> 
> 
> ---- 
> Please address private mail -- mail of interest to only one person -- directly 
> to that person. I.e., send parts/car transactions and negotiations as well as 
> other personal messages only to the intended recipient, not to the Clubhouse 
> public address. This practice will protect your privacy, reduce the total volume 
> of mail and fine tune the content signal to Mopar topic. Thanks! 
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines: 
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.