RE: Max Wedge Vacuum Supply

[Brian Schlump <brianjan_64@xxxxxxx>]

Nick,
Does your engine have a vacuum connection for the pcv on the rear side 
of your intake manifold?   If so, you should swap it for one that has 
the hose connection to the pcv plus a small connection for the heater 
vacuum hose.   These show up occasionally on eBay, or one of the members 
here may have a spare he can sell you.

Nick Tiberio wrote:
> 
> I need to supply vacuum to my heater control switch. Is anyone running a 
> 
> Max Wedge with a working heater/defroster. My vacuum line is just coiled 
> 
> up on the firewall and the only suppy I can see is from my right side 
> carb. The left carb is supplying vacuum to my distributor. The vacuum 
> line to the control switch is also a smaller diameter hose that will not 
> 
> fit the port on the carb. Is it as simple as using a reducer to mate to 
> different size lines. I'd like some ideas of what works...Thanks
> 
> Nick Tiberio
> FuryUs63



'64 Belvedere
Davenport, Iowa

"The difference between ordinary and extraordinary is that little 
extra."


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.