Re: Kramers inner fenders

[Dan McCormack <mcwheels@xxxxxxxxxxxxxx>]

Kind of hard to measure accurately with the hinge in place Alex but the 
holes are about 8 1/4" apart on my 63 Fury. The number I have for Kramer's 
is 724-285-5566.

BTW is something wrong with the 62-65 home web page? (I don't mean Topica) I 
haven't been able to get it to come up all day.

Dan


----- Original Message ----- 
From: "Alex Ariemiea" <ajaremea@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, September 29, 2008 5:58 PM
Subject: Kramers inner fenders




I just finished installing the inner fenders that I bought from Kramers 
about 2 years ago. The sticker said it was for the 62-64 Dodge and Plymouth. 
After all that work I set one of the hood hinges in place only to find out 
that the spacing for the mounting bolts did not match up! The two back holes 
lined up good but the front hole on the hinge plate was about 2 inches 
farther toward the front the car than the hole in the inner fender! The 
other side was the same. Does anyone know if the 62 hinges are longer than 
the 63-64?
Could someone measure the distance between the front hole and the rear holes 
on their 63 or 64 Dodge for me. I'm really between a rock and a hard place 
now and don't know what to do. I was going to call Kramers but I have since 
misplaced there pamplet of parts. Anyone have a phone number for him?? Any 
help would be appreciated. Alex


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.