Re: 383 Intake Gaskets

[Gary <mopar413@xxxxxxxxxxx>]

If you have an after market manifold then I would consider installing gaskets.  Other wise just a  little sealer in the corners.  
---- "Dennis C." <dennis.2914@xxxxxxxxx> wrote: 
> 
> I'm going to be pulling the intake on my 63 SF.  I have a new intake 
> gasket set, it has the pan and a set of gaskets.  
> 
> I believe I've seen the intake manifolds installed with just the metal 
> pan.  Am I correct and if so is there a good way to know when gaskets 
> should be installed along with the pan?
> 
> Thanks
> Dennis C.
> 
> 1996 Dodge Ram 3500 Van Conversion
> 1964 Plymouth Belvedere 318 Auto
> 1963 Plymouth Sport Fury 383 4-speed
> 1949 Dodge Pickup 289/C4 soon to be changed
> 1998 Honda Valkyrie Standard
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.