Re: Roller Rockers available for the Poly - need three orders
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Roller Rockers available for the Poly - need three orders



Wow guys... Don over at Racer Brown quoted me $800/set for an initial
TEN-set run! Gary found a guy that¹s willing to do only THREE? That¹s the
most outstanding news I¹ve heard all day!

Gary, you¹re a miracle worker! Guys, I say jump on it!

~Jason

On 11/25/08 8:03 PM, "Gary Pavlovich" <glpavlovich@xxxxxxx> wrote:

> Polyheads,
>  
> Roller rockers are ready for the Poly now.
> I will need three orders at $800 a set to get the first three roller rocker
> sets made; price decreases with more orders but at this price I am hoping for
> the three orders needed for production.
>  
> Yes, they are expensive, about $250 more than the best LA roller rocker set
> but that is the price of admission for a quality set of Poly Roller Rockers.
> The material is 2024 aluminum - a cold finished casting with superior strength
> over the Comp Cams/Crane offerings.
>  
> I am not benefiting from these three or any future orders in any way, just
> trying to complete the circle of true High Performance Poly parts to the few
> that take their engines to the next level.
> Our mfgr. is not making a normal profit on the creation of these roller
> rockers either; I am thankful that he has even committed to the project.
>  
> Poly Roller Camshafts are in the near future.
>  
> Please forward any orders and serious inquiries to me off-list at
> glpavlovich@xxxxxxx
> Thank you,
> Gary
>  
>  
> 


-- 
[INSERT CLEVER SIGNATURE HERE]


--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.