62 Belvedere Switzerland

[Karl Klingler <karl.klingler@xxxxxxxxxx>]

 Hi to everybody,

I own a 1962 Belvedere Max Wedge recreation car here in Switzerland - the
only one in the whole country. Unfortunately I am missing the following
molding parts:

- trunk molding including plastic insert emblem
- trunk lid molding RH + LH

Is there a source to get them (I am looking for more then 1.5 years for
these parts ...)?

Thank you for your help


Karl
-----Ursprüngliche Nachricht-----
Von: bt6t4@xxxxxxxxx [mailto:bt6t4@xxxxxxxxx] 
Gesendet: Freitag, 28. November 2008 20:53
An: 1962to1965mopars@xxxxxxxxxx
Betreff: Re: Splatter paint in trunk?


Should be the entire surface.Even under the mat. That's how mine was. I'm
going w/ no mat due to its' ability to hold moisture.

George


--- On Fri, 11/28/08, Gary H. <spigot2039@xxxxxxxxxxx> wrote:

> From: Gary H. <spigot2039@xxxxxxxxxxx>
> Subject: Splatter paint in trunk?
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Friday, November 28, 2008, 11:31 AM A fellow asked me how much 
> of the trunk surface has splatter paint on a 1962 Plymouth (or any 
> 62-65 Mopar)? Is it where the mat does not cover? Or under the 
> cardboard inserts at the sides?
> 
> http://www.ozcars.net/vehicleimages/FSVehicle00018Group59.jpg
>  
> Thanks,
> Gary H. 
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will 
> protect your privacy, reduce the total volume of mail and fine tune 
> the content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 


      


----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER