RE: R&R my oilpan

[bt6t4@xxxxxxxxx]

That's all I had to do also Paul. Are you putting a stock pan back on? I have the part # for the stock one. 5007807. It might be superceded by now from Mopar Perf. 

George


--- On Fri, 12/5/08, Jeff Adams <ledman_70@xxxxxxxxxxx> wrote:

> From: Jeff Adams <ledman_70@xxxxxxxxxxx>
> Subject: RE: R&R my oilpan
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Friday, December 5, 2008, 1:24 PM
> I have pulled the stock pan off the 426 in my 64 Polara by
> only removing 
> the centerlink in the suspension and maybe the lower
> bellhousing 
> inspection cover (mine is a 4-spd). I never touched
> anything else.
> 
> Paul Lennemann wrote:
> > 
> > 
> > I need to change the oil pan that was installed on my
> engine during the 
> > recent rebuild.  It is a generic 8qt. pan that hangs @
> 3/4" lower than 
> > my old pan.  The problem is that it drags going in and
> out of my 
> > driveway as well as on other things like speed bumps. 
> It drug one too 
> > many times and now has a hole.
> > My question is how far do I have to raise the engine
> in order to wiggle 
> > it out of there?  Will I have to unbolt the tranny and
> basically pull it 
> > 
> > all the way out?  Or can I leave it bolted up and just
> undo the exhaust 
> > and some of the other misc. items?
> > Paul L.
> > '63 Sport Fury
> > 440/727
> >
> http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html
> 
> 
> 
> Jeff Adams
> 64 Polara
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send parts/car
> transactions and negotiations as well as other personal
> messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 


      


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.