Re: Fuel sending unit tool

[65 <65Val@xxxxxxxxx>]

The  drive tool should be brass, to avaoid any sparks.


----- Original Message ----- 
From: "Herb" <zephyr9900@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Saturday, January 10, 2009 12:43 PM
Subject: Re: Fuel sending unit tool





Cameron,

If you can't find a tool, Just use a small dull chisel or a screw driver and
tap lightly counter clockwise with a hammer on one of the tabs that are
sticking up.  It will or should come off fairly easily unless some gorilla
installed it.  (-;  When reinstalling it make sure you have all three tabs
aligned in their grove and ultimately locked in to avoid leeks.  Again use
the same tool to reinstall the ring tapping it clockwise.

Now for the disclaimer, I don't recommend using a tool (screwdriver) in a
way that it is not intended to be used for safety reasons, But!

Herb

-------Original Message-------

From: Cameron Hubling
Date: 1/10/2009 1:04:24 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Fuel sending unit tool

Does anyone have a fuel sending unit tool for sale?

Cameron
65 Valiant Signet

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person --  
directly to that person.  I.e., send parts/car transactions and negotiations 
as well as other personal messages only to the intended recipient, not to 
the Clubhouse public address. This practice will protect your privacy, 
reduce the total volume of mail and fine tune the content signal to Mopar 
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.