Re: Alternative on Dash Clock Conversions

[Tony Brummett <brummett@xxxxxxxxx>]

On Fri, Jan 30, 2009 at 9:07 AM, Jeff Adams <ledman_70@xxxxxxxxxxx> wrote:
> I've thought about this before, but since we have been able to use a
> small Radio Shack voltage regulator to replace the regualtor in our
> gauge clusters, why can't we just wire a small regulator/resistor into a
> battery operated clock??? They just run on one 1.5 volt battery. Does
> this sound feasible to anyone?

Maybe this would do the job:
http://www.national.com/mpf/LP/LP3992.html

Its input would be the output from the voltage regulator in the dash,
since it takes a 5V input.  Digikey has them for $1.20 a piece.

-- Tony


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.