Engine mounts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Engine mounts



I am getting ready to drop the 413 into my 64 dodge tomorrow.Got the engine brackets yesterday.. Question is: should the left cushion overlap the bracket-to the front- by almost 1/2 the width of the cushion?. That puts about 1/4 " clearance between the edge of the cushion and the oil pump. I can't see any other way of doing it. Thanks for any input..........................MO...............SW IOWA 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.