New swap meet items

["Gary H." <spigot2039@xxxxxxxxxxx>]

Hi all,

Below are the latest additions to the 1962 to 1965 Mopar Swap Meet Page.

Reminder: In the past I sent this "heads up" notice about the new ads to Clubhouse members as soon as I put the ads on the Swap Meet Page.

Now I post the listings here first, then upload the ads to the Swap Meet Page a day or two *after* they get listed here.

Thus Clubhouse members get a longer "first shot" at the listings as a
membership perk. :)

Use http://1962to1965mopar.ornocar.com/swapmeet2009.html to see the swap meet.

Regards,
Gary H.


FOR SALE

1964 Plymouth Sport Fury  Drag race car for sale. Its red and all steel, minimal rust. Original floors all sound. It has a full roll cage. Mini tubed, springs moved inboard of frame. Welded frame connectors. It has an Indy cylinder head built 440 with 30 passes on it. The trans was fresh at the same time. Tires are all new.  Front Wilwood disc brakes. Spare trans and  converter. 742 housing 8 3/4 rear, 4.56 gears with spool. It runs  10.70  1/4 mile  time  6.70 1/8 mile time. I have owned this car and raced it for 15  years. Located western Oregon  $25,000 541-961-0021 (February 14, 2008)

1964 Plymouth Savoy Wagon for sale. Originally 318 car with power steering and brakes. The car was originally undercoated. I removed the 318 and trans and totally stripped the bottom of the car to bare metal. I then tig welded the pin holes in the floor (pin holes were all there were in the floor) and then Por-15ed the entire bottom of the car. I have a chassis shop and moved the springs in on the frame rails with a Mopar kit and installed a Cal Trac single leaf spring that is equal to SS springs in length and rate. I also professionally tied the frames, The 1965 8 3/4 inch differential was then fitted with spring mount in the proper places and re-mounted. The car has been professionally mini tubbed and a 13 inch+ tire/wheel combo can be fitted now. All glass is good and the only remaining rust is just along the top of the rear wheel wells. The front end has been completely rebuilt and the car has Weld Mag lite wheels and near new tires. I have the original interior pieces to include seats, door panels etc. I also have 4 A100 Van seats. My idea was to create a 1 of none SS wagon with 2 seats in front and 2 in back. The car has a hemi hood scoop mounted and the dash, grill and all trim is nice. This is NOT junk. I also have a 1965 Torqueflite so a slip yoke driveshaft can be fitted.  I have a 1972  440 engine and all the parts (new) to rebuild it with Purple stripe cam, lifters, keepers, retainers, valves, new rods, etc. I also have a new Chrysler electronic distributor and chrome box, Edelbrock intake, Chrome valve covers, and a bunch of other stuff.  I have a few pics and will get more soon. Car is in Dallas Texas. I will consider Cash or trade for? Price depends on what you want but is reasonable. Thanks. Tommy   214-662-3370   Tommydreynolds AT sbcglobal.net (Replace the AT with @ to email the seller. February 14, 2009)

1965 Plymouth Satellite for sale. 2 door hard top, has original 383-4bbl, 4-speed console with factory tach, 8-3/4 rear-end, all glass is good, very straight, some rust, exterior Ivory with gold interior, Needs to be restored, runs strong and drives. $11,500 Texas car located in Texas. contact: trapper10 AT sbcglobal.net  (Replace the AT with @ to email the seller. February 14, 2009)


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.