RE: FYI: Plug dimensions (Whoops)

[Paul Lennemann <pjlenn@xxxxxxxxx>]

Rich, this is a memory from 40 years ago, so take it for what it's 
worth.  I remember running a Champion J14Y in my stock 318 poly.  With 
your "goodies" you would probably need the colder J12Y.  Can you cross 
reference this to an Autolite plug?

Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html

Rich Kinsley wrote:
> 
> Sorry guys the columns kinda shifted around but I think you can figure 
> it out. 
> 
>                    Rich K
> =====================================================================
> Rich Kinsley wrote:
> > 
> > 
> > 
> > Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> > 
> > For the following Autolite plugs the info on the chart is:
> > Plug   Dia   Reach   Hex     Heat  Resistor    Core     seat
> > 75     14mm   3/8"   13/16"  C7     Non-res    copper   gasket 
> > 85      "      "       "     D7      Res         "        "
> > AP85    "      "       "     E7       "      Plat-copper  "
> > 86      "      "       "     D7       "         copper    "
> > AP86    "      "       "     E7       "      Plat-copper  "
> > 
> > These are the ones I found that I thought would be useable due to the 
> > reach. I think I really want the 75's
> 
> 
> 
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.