Re: 400 Heads
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 400 Heads




The car is a stone cold stock driver.  Looked, they are 452 heads and was
told they had a lot of mileage on them.  Just looking to save $ on upgrading
the 361 heads to todays standards.

         
 Herb 
 
1956 Plymouth Belvedere 361
1959 Coronet 326 Poly
1963 Fury 2D/HT 6.1
1963 Sport Fury Convertible 361
1970 Challenger RT 440
1999 Durango SLT 5.9
2006 300-C Heritage 5.7
2008 SRT-8 Magnum 6.1
St. Louis, MO.
 
http://1962to1965mopar.ornocar.com/mmo42009.html
  
 
 
 
-------Original Message-------
 
From: Joey
Date: 7/11/2009 4:01:25 PM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: 400 Heads
 
I know, but probably not enough to be real noticable, unless I missed
something I believe this is pretty much a stock driver. The good news is
detonation will become less of an issue also.
Joey
 
 
 
----- Original Message -----
From: <Dodger7998@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Saturday, July 11, 2009 3:43 PM
Subject: Re: 400 Heads
 
 
>
>
> I did not get in on the beginning of this,,,,,but am thinking he is going
> from closed heads to open heads and there will be drastic CR change
>
>
> In a message dated 7/11/2009 2:37:59 P.M. Central Daylight Time,
> jake4@xxxxxxxxxx writes:
>
>
> Herb,
>
> Look at the part number on the heads, located  either between the rocker
> pads
> or underneath on the head gasket side, the  last three numbers you are
> looking for are 452 or 346. If you have either  set then go ahead and put
> them on assuming they are in good condition, you  will not run into any
> issues.
>
> Joey
> ----- Original Message -----
> From: "Herb" <zephyr9900@xxxxxxxxxxx>
> To: "1962 to 1965 Mopars"  <1962to1965mopars@xxxxxxxxxx>
> Sent: Saturday, July 11, 2009 1:24  PM
> Subject: 400 Heads
>
>
>>
>>
>> Recently their was a  discussions about the merits of the 400 heads.  The
>> 361
>>  in my Sport Fury is in need of a valve job.  As opposed to going
>> through
>> those heads and having the seats replaced and all the other  machine work
>> needed for todays gas, would I be better off using a set  of 400 heads
> that
>> were just given to me saving $ in machine  work?  Or would I run into
>> compression or valve clearance  problems?
>>         
>> Herb
>>
>> 1956 Plymouth  Belvedere 361
>> 1959 Coronet 326 Poly
>> 1963 Fury 2D/HT  6.1
>> 1963 Sport Fury Convertible 361
>> 1970 Challenger RT  440
>> 1999 Durango SLT 5.9
>> 2006 300-C Heritage 5.7
>> 2008  SRT-8 Magnum 6.1
>> St. Louis, MO.
>>
>>  http://1962to1965mopar.ornocar.com/mmo42009.html
>>
>>
>>
>>
>>  [Non-text portions of this message have been removed]
>>
>>
>>  ----
>> Please address private mail -- mail of interest to only one  person --
>> directly to that person.  I.e., send parts/car  transactions and
>> negotiations as well as other personal messages only  to the intended
>> recipient, not to the Clubhouse public address. This  practice will
> protect
>> your privacy, reduce the total volume of mail  and fine tune the content
>> signal to Mopar topic.   Thanks!
>>
>> '62 to '65 Mopar Clubhouse Discussion  Guidelines:
>>  http://www.1962to1965mopar.ornocar.org/mletiq.html.
>>
>>
>>
>
>
> ----
> Please address private mail -- mail of interest to only  one person --
> directly to that person.  I.e., send parts/car transactions  and
> negotiations as
> well as other personal messages only to the intended  recipient, not to
> the
> Clubhouse public address. This practice will protect  your privacy, reduce
> the total volume of mail and fine tune the content signal  to Mopar topic.
> Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion  Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>
>
> **************A Good Credit Score is 700 or Above. See yours in just 2
> easy
> steps!
> (http://pr.atwola
com/promoclk/100126575x1221823300x1201398714/aol?redir=http://www
freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=
> JulystepsfooterNO62)
>
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will protect
> your privacy, reduce the total volume of mail and fine tune the content
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
>
>
>
 
 
----
Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!
 
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
 
 
 
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.