There is a really great alternator I use for any old Mopar. Just go to your local parts store and order a replacement alternator for a 1985 Chrysler Fifth Avenue, with the "high amperage option". This is a dual field, 78 amp alternator that will bolt right up to your car's current brackets, and only costs about $45.00 all day long. This amperage is too high for our stock old cars, but there is an easy fix for this, too: Simply run a good-sized second charge wire from the alternator directly to the big stud on the starter relay, and use a fusible link. Only downside is your amp gauge won't read properly anymore. Buy a cheap voltmeter, which only needs be connected to ANY wire under the dash that is powered up with the ignition switch. I prefer a voltmeter to an amp gauge, anyway. Finally, the other posters are right. Stay away from one-wire alternators. They were invented for farm tractors. ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.