Re: new filter and gasket for 727 transmission

[Doug Daniel <dougdaniel50@xxxxxxxxx>]

you need  too get yourself a technical service manual for your ride , and lots of rags and some speedy  dry  take out all bolts but one  get large catch pan hold pan with one hand and loosen the last  bolt tilt  towards pan hopefully  some of the fluid goes in pan remove old gasket and filter drain converter and  replace with about 10 quartss  filter screws too 28 inch pounds base bolts too 150 inch pounds   good luck   

--- On Wed, 4/8/09, Douglas Sutherland <pluckedchickens@xxxxxxxxxxx> wrote:

> From: Douglas Sutherland <pluckedchickens@xxxxxxxxxxx>
> Subject: new filter and gasket for 727 transmission
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Wednesday, April 8, 2009, 4:47 PM
> 
> 
> 
> is this a do-it-yourself job?  
> 
> any tips or tricks to make the job go faster or easier?
> 
> 
> Thanks!
> 
> _________________________________________________________________
> Rediscover Hotmail®: Get quick friend updates right in
> your inbox. 
> http://windowslive.com/RediscoverHotmail?ocid=TXT_TAGLM_WL_HM_Rediscover_Updates1_042009
> --
> [Non-text portions of this message have been removed]
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
>