Re: How about this radiator?

[Nico Over <nover@xxxxxxxx>]

Rich, I would recommend paying extra and get a rad with the mounting flanges 
already put on, that is unless you have access to a tig welder. I went this 
route (flanges mounted) for both my 64 and 63 cars. Install then was a 
breeze, just a matter of drilling the appropriate holes in the mounting 
flanges, hooking up hoses and go.
My 2 Cents
Nico Over
Va. Beach, Va
64 SF 451 4 speed
63 Dodge 330 MW clone
63 Dodge 440 wagon


 On Thu,  9 Apr 2009 03:40:21 +0000, Rich Kinsley wrote
> I am going to order a new radiator from Summit tomorrow so if anyone 
> has any negative or positive comments please reply right away if possible.
> 
> The radiator is the SUM-381425  It is listed for Ford but has the 
> correct hose configuration for us. It will fit and it does have 
> trans cooler provision. I will have to devise mounting. It's an 
> aluminum crossflow. It looks pretty good by it's description and 
> appears to have most things I want except mounting. It's on sale for 
> $189 which is pretty cheap.
> 
> Speak now if you have any opinions. I'll be sure to let you all know 
> how it works out.
> 
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> 
> ----
> Please address private mail -- mail of interest to only one person --
>  directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will 
> protect your privacy, reduce the total volume of mail and fine tune 
> the content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.