Re: Replacement Radiator Question

[Don Dulmage <big-d@xxxxxxxxxxxx>]

I read all these cooling deals. I have fixed many with a simple pulley 
change. It gets over ninety here in Canada quite often (was 82 
yeasterday)and occasionally we d see 100F. Still car runs fine as do the 
ones I fixed. I think the tech must still be around on site. it works and 
costs a lot less that several rads doubleyoked mikawaky pumps and nuclear 
thermostats. I know , it is too simple. Cant help that. It works
Don
----- Original Message ----- 
From: "Rich Kinsley" <rlkinsley@xxxxxxxxx>
To: <dennis.2914@xxxxxxxxx>
Cc: <1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, April 26, 2009 9:53 AM
Subject: RE: Replacement Radiator Question


> I too have gone through about 3 semi-stock radiators in a quest to
> actually cool the beast. Finally I found an aluminum crossflow radiator
> from Summit with a trans cooler. I did have to take it to my radiator
> shop to have the lower neck repositioned. I also added a drain pitcock
> which it did not have. Even with all this work I only have about $330
> total in it including a 16lb cap from Summit. I can't say how well it
> will work yet as I'm not quite done. It certainly looks like I have more
> cooling area. I did have to fab some supports but you could just have
> the radiator shop install it for you. I doubt it would cost over $200
> for that install.  There was a small issue with the horns too as they
> were too close and I had to reshape the brackets for clearance. My
> custom battery box also had to be notched but it missed my battery OK.
> All in all it wasn't that hard to do and it looks very nice. I found
> some hoses that fit OK after some searching. I used a Gates 21673 on the
> top and a NAPA flex hose #FM-44 on the bottom. This may not be the same
> for hoses in your case as mine is a poly. I am getting a high volume
> t-stat too as I think that may have also been an issue with my high flow
> pump. I'll send you some pictures seperate. I did send some to Gary H to
> add to my list pictures.
>
> I totally understand your dilema. Good luck, it is doable.
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
> =====================================================================
> Dennis C. wrote:
> > I have given up on my stock radiator.  I had it recored but the new core
> >
> > only has 10 fins/inch and is not able to do the job in my 63 SF with a
> > 383.  It is doing ok now but I live in Yuma Az. and the weather is just
> > starting to get warm.
> >
> > I did a search on the Internet and came up with:
> >
> > http://www.usradiator.com/default.htm
> >
> > I talked to them and although none are listed on their site they do make
> >
> > one for my car.
> >
> > I don't have the time or skills to adapt a rediator, I want a direct
> > replacement unit.  I've given up on trying to keep the stock look.  I
> > would be interested in knowing other choices that some of you may have
> > had good experience with.
> >
> > Thanks
> > Dennis C.
> >
> > 1996 Dodge Ram 3500 Van Conversion
> > 1964 Plymouth Belvedere 318 Auto
> > 1963 Plymouth Sport Fury 383 4-speed
> > 1949 Dodge Pickup 289/C4 soon to be changed
> > 1998 Honda Valkyrie Standard
>
>
>
> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.