If the adjuster is backed out to it's limit, and you have no end play, the axles are too long.
Jimmy Bill wrote:
I'm wrapping up the installation of some 3.23's in my Coronet and I'm having some problems with setting the axle end play. I'm familiar with the procedure...tap on the left axle a few times, adjust the right until until Zero, then back off the adjuster off 3-4 notches. But I can't seem to get any end play at all. I have the adjuster flush or even depressed in the axle mounting collar, but I've got no slack. Anyt thoughts?
---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines:http://www.1962to1965mopar.ornocar.org/mletiq.html.
Back to the Home of the Forward Look Network