RE: rear quarter window

[Paul Lennemann <pjlenn@xxxxxxxxx>]

Mo, when I had my windshield replaced the guy at the glass shop 
mentioned that if I ever wanted to replace my side glass they would be 
$75 each.  That seems pretty reasonable.  Of course you would have to 
supply them with a template. But that could be a solution to your 
problem.  I can't remember right now if the glass you need has a chrome 
channel along the top edge.  If so, you'd have to come up with one of 
those too.

Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html

Steve Mick wrote:
> 
> This is the right rear quarter window for a 2 dr hdtp. Yes the internals 
> 
> were stuck and binding even after a big dose of spray lube. I think it 
> is 
> bent and I also think the window is for a 66-67. With the window seated 
> all 
> the way up in the top channel the front edge angle does not match the 
> back 
> edge of the door glass.................MO   sw  iowa
> ----- Original Message ----- 
> From: <roger@xxxxxxxxxxxxxxxxx>
> To: "mopar group" <1962to1965mopars@xxxxxxxxxx>
> Sent: Tuesday, May 19, 2009 6:34 PM
> Subject: Re: rear quarter window
> 
> 
> 
> Sounds to me the pivot track dropped or something or the window is 
> wrong. 
> You sure all the interanls are there and didn't drop down in the door?
> 
> 
> ------Original Message------
> From: MO ( Steve Mick)
> To: mopar group
> ReplyTo: mopar group
> Sent: May 18, 2009 10:16 PM
> Subject: rear quarter window
> 
> 
> On a 64 Dodge 440 -2 dr hdtp.(or Polara) On the reat side window--is 
> there a
> differwence between it and the later( like 66-67)with the different roof
> line? My Dodge at one time had that window broke out and I can't get the
> replacement window that came with the car to line up right with the 
> angle of
> the rear edge of the front window..  I had problems with getting the 
> roll
> up-down mechanism to work and wondering if   something is not right 
> there..
> I'm thinking there is a difference in the glass it'self and that I have 
> a
> later year glass...........................MO..sw  iowa
> 
> 
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations 
> as well as other personal messages only to the intended recipient, not 
> to 
> the Clubhouse public address. This practice will protect your privacy, 
> reduce the total volume of mail and fine tune the content signal to 
> Mopar 
> topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
> 
> 
> 
> 
> Sent via BlackBerry by AT&T
> 
> 
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations 
> as well as other personal messages only to the intended recipient, not 
> to 
> the Clubhouse public address. This practice will protect your privacy, 
> reduce the total volume of mail and fine tune the content signal to 
> Mopar 
> topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.
> 
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.