RE: Mopar 360 Stroker Motor Build

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

I found this very interesting as I attended the Saddleback JC automotive 
course in the 73/74 era. I believe this is a new facility as we used the 
shop at El Toro HS. They seem to have better resources now too. I did a 
225 slant six. Stan VanSpanje, from Holland, and John Ceasareo were my 
instructors. We were all in our 30's. They have probably retired by now 
too.

I took every auto course they offered at the time, as a hobby/interest. 
It helped me greatly. I was doing 9 units a semester in night classes as 
I was of course married with a family and a very full time job. It was a 
bit tiring but alot of fun.

Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
=====================================================================
@mypacks.net wrote:
> 
> This is old hat for a lot of members here, but this Web page gives a 
> pretty full description of how a fellow built a Mopar 360 Stroker Motor. 
> http://www.dustyengineering.com/engine/stroker.html
> 
> Maybe Gary P. and I can get together and revise / update the poly 
> stroker build page. :)
> 
> Thanks,
> Gary H.
> 



Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.