RE: KYB shocks alternative?

[62pluckedchicken@xxxxxxxxx]

Thanks Tony .. I'll save this in case shocks2springs or Kanter doesn't 
pan out.. I'll bet I could get someone to do some mods to make it work 
:)

Tony Brummett wrote:
> 
> On Wed, Aug 5, 2009 at 4:48 PM, <62pluckedchicken@xxxxxxxxx> wrote:
> >
> > I can't beleive it.. the guy at Sears was correct.. they don't have
> > Monroe shocks for the front (just the rear) for a 1962 Newport..
> 
> I had a '64 300 years ago (should have been the same suspension as
> your Newport), and the previous owner had had the same difficulty then
> finding new front shocks.  If I remember right, they're super short.
> 
> The guy had modified the way the top of the shock mounts by welding a
> tube in that was attached to the front subframe at the bottom, and
> capped at the top, effectively moving the top shock mount higher and
> allowing you to use a longer (and easier to find) shock from an
> A-body.  The shock was installed inside the tube from the bottom, and
> the top mounting bolt went through a hole in the top cap of the tube.
> Unfortunately I don't have the car anymore, and don't think I have any
> pictures of that part...
> 
> It's an option if you absolutely can't find any shocks that fit...
> 
> -- Tony  brummett@xxxxxxxxx
> '64 Dodge 440
> '65 Dart GT


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.