RE: Fw: 361 performance 1965 Coronet 500

["Gary H." <spigot2039@xxxxxxxxxxx>]

Gather all your specs and talk to a cam guy at the major cam companies. For example, Jim at Racer Brown is one of the cam gurus mentioned here frequently. Tell him about what your car has (e.g., engine ci, carb, torque converter rear ratio) and your goals with the car.  Last I heard Jim still ground every cam personally (adjusting lobe centers and specs to exactly match your car) and he had Mopars as his specialty.  Contact info. and cam spec links are on the 62-65 vendor page: http://1962to1965mopar.ornocar.com/restoration-sources.html 

Let us know how it turns out. 

Thanks,
Gary H. 
 

-----Original Message-----
 
>Thanks everyone.  Any recommendations on a cam and lifters?
>
>Dave 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.