I used the black 3M weather strip adhesive, it worked great,,,,,,,I split
mine at the latch,,,,,,,,think it might have looked better if I had done
it
at the middle of passenger area, worked best with two people, one to hold
the strip while the other put on glue about 2 foot at a time, and stuck
in
place,,,,,
In a message dated 9/4/2009 9:51:51 P.M. Central Daylight Time,
62pluckedchicken@xxxxxxxxx writes:
Got the trunk painted.. just about ready to install new
weather-stripping... 2 questions
1) any suggestions on a good glue/cement?
2) where is the best start/end point? have the weather-stripping ends
meet at the latch? the back (closest to the passenger compartment)? or
on side?
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as
well as other personal messages only to the intended recipient, not to
the
Clubhouse public address. This practice will protect your privacy, reduce
the total volume of mail and fine tune the content signal to Mopar topic.
Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
[Non-text portions of this message have been removed]
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect
your privacy, reduce the total volume of mail and fine tune the content
signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.