stroker pistons

[William Harrison <bbjt3@xxxxxxxxx>]

Hello out there in mopar land.

I am doing a stroker project over the winter and have been told that if I put a 440 crank in my 383 and use 440 rods that I won't have to shave the lobes on the crank for piston clearance.
Thats all well and good but what pistons will work with that combo as the 440 rod is 6.7 versus the 383 at 6.385.
Any help would be appreciated.

Thanks
Bill
65 Coronet 2 dr post.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.