Re: Holley carb ID

["MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>]

Rich, that was one of the most common performance carbs from the past.  I am 
not sure it came with the double pump, but there were many performance parts 
and upgrades from Holly and aftermarket. It was in that 750 cfm range.. 
Isn't it a dual side inlet with a metering block on the back as well as the 
front( plates between bowls and main body?) It could have vacume secondarys 
or converted to mechanical.  Not sure if it has a choke and if it is 
mechanical or electric.  Would you have any interest in selling it for my 
nostalgia HP dodge?...........................Steve
----- Original Message ----- 
From: "Rich Kinsley" <rlkinsley@xxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Monday, November 23, 2009 5:09 PM
Subject: Holley carb ID


> Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
>
> I have a Holley carb that I'd like to ID. I was told it's a 750cfm. It's
> a 4bbl double pumper with 3310-6  and 2959  stamped on the choke air
> horn. There's a P-80 cast on the main body side. Under the air filter
> gasket area there's a 6R 6931  and the sec nozzles are ^SR-107. Can
> anybody ID it correct?
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.