gear change & carb ??

[Paul Lennemann <pjlenn@xxxxxxxxx>]

I'm currently running a 4.30 SG in my car.  I changed to 2.76 peg leg 
once to do some cruising.  When I did I had a problem with the car 
running way too rich and fouling plugs.  I was running a 650 CFM Carter 
AFB race type carb w/o a choke.  I got a strip kit and changed jets and 
metering rods w/ no improvement.  So I just changed everything back to 
the original setup gears and all.
I'm wanting to change gears again.  This time either to 3.23 or 3.55 SG. 
I am now running a 780CFM Holley Street Avenger.  Any guesses as to 
whether I'll run into the same problem?

Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.