Re: Torsion Bars

[Tony Brummett <brummett@xxxxxxxxx>]

On Tue, Mar 9, 2010 at 5:34 PM, Brad Adams <thirdgenroughneck@xxxxxxxxx> wrote:
> Does anyone use just suspension's 1" torsion bars? I ordered a pair from them but
> they aren't marked left or right. I tried emailing them but as of now I'm still waiting on a
> reply. Any help from y'all is appreciated!

I've heard some of the larger diameter aftermarket bars don't have a
right and left, though it may only be for the bars larger than 1.1".
Helpful, I know...

This forum post says that the 1" bars from Just Suspension are the
same - no left or right specific.
http://www.forabodiesonly.com/mopar/showthread.php?t=73295

Are there any numbers stamped in the end, or any paint marks along the
bar?  From the factory, the left bars had odd part numbers and 2 paint
marks, while the rights had even numbers and 1 paint mark.  I could
see an aftermarket place doing the same thing.

In any case, there's no front and back to any torsion bar, so you
don't need to care which end foes toward the front of the car.

-- Tony


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.