
Re: 360 swap
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 360 swap
- From: Joey <jake4@xxxxxxxxxx>
- Date: Wed, 1 Sep 2010 20:56:15 -0400
the engine should bolt up to your 727, might want to check on converter
weights though, later 360's I think are balanced differently.
Joey
----- Original Message -----
From: "Don" <mopar4me@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, September 01, 2010 7:33 PM
Subject: Re: 360 swap
You'll definitely have to swap the oil pan (truck/van is rear sump) and
use the oil pickup for the center sump. You'll also need a car 360 oil
pan - 273/318/340 pans won't fit the 360.
Don
On 9/1/2010 5:01 PM, Dooner Funderburk wrote:
My poly 318 in my 64 Belvedere isn't a good running dependable engine
right now (many different reasons), and I have an opportunity to swap in
a running 360 from a 80s model Dodge van. It has been slightly refreshed
and best of all, it is free. It will be a temp engine swap till I can
save up money to restore. I want to enjoy driving the car some.
Will this swap work? What heads up can you give me, on things that will
not work (oil pan, exhaust manifolds, fit my 727, etc.)?
Thanks guys
Dooner
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will
protect your privacy, reduce the total volume of mail and fine tune the
content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect
your privacy, reduce the total volume of mail and fine tune the content
signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
Back to the Home of the Forward Look Network