RE: Fury update

[David Bailey <bb64d440@xxxxxxxxxxx>]

Thank you Steve, yes please do keep an eye out for a good right side passenger door for the 2 door hard top ’64 Dodge B body model 440. Finding good sheet metal specifically for the 440 is like finding hens’ teeth. So I’m trying to get as many ‘feelers’ out there as I can.
Thanks much.

Dave Bailey
'64 Dodge B-body 440, 2dr ht, 383 cid, 4 bbl
4 spd, '64 Sure-Grip rear axle, duel exh 
ZZW - Anniversary Gold w/ white side sweep
Being restored to - as stock original (So far)






 
> To: 1962to1965mopars@xxxxxxxxxx
> From: micher@xxxxxxxxxxxxxxx
> Subject: Re: Fury update
> Date: Mon, 7 Feb 2011 16:21:10 -0600
> 
> 
> This Sport Fury is way to good to part out. The only rust is exterior as 
> shown in my link below my name. No rust in the floors or inner rockers- No 
> rust on the frames. I could probably find you a door. They would be 70- 130 
> miles from me and the shipping probably a little pricey Let me know if you 
> want me to check it out.........................MO
> 
> {Steve Mick}
> http://stevemick1964dodge.shutterfly.com/pictures/5
> ----- Original Message ----- 
> From: "David Bailey" <bb64d440@xxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Thursday, February 03, 2011 5:56 AM
> Subject: RE: Fury update
> 
> 
> 
> 
> 
> You’re welcome for the snow Steve, (I do like sharing) but I should be the 
> one thanking you for the snow, ice and freezing rain we got here in PA. Here 
> is something else I’ll share with ya, how’s ’bout an early spring!!! Yes, 
> our very own PA Punxsutawney Phil predicted an early spring this year!
> I did notice the saggy pick-up and assumed it was full up with goodies. I 
> also noted as someone else did, that there is a later rear axle assembly 
> under it. Nice! Great way to get spare parts!
> You sound as though you’re undecided about what you might do with the car. 
> Hum…might you be considering parting it out? If you do, I’m in the market 
> for a good Right Side Passenger Door for my 1964 Dodge B body Model 440 
> 2-door hardtop. My door “looks great” but it was hit then straightened with 
> a panel puller and bondo. I’d prefer to have all straight sheet metal on 
> this car.
> Good luck Steve!
> 
> Dave Bailey
> '64 Dodge B-body 440, 2dr ht, 383 cid, 4 bbl
> 4 spd, '64 Sure-Grip rear axle, duel exh
> ZZW - Anniversary Gold w/ white side sweep
> Being restored to - as stock original (So far)
> 
> 
> 
> 
> 
> 
> 
> > To: 1962to1965mopars@xxxxxxxxxx
> > From: micher@xxxxxxxxxxxxxxx
> > Subject: Re: Fury update
> > Date: Wed, 2 Feb 2011 13:52:45 -0600
> >
> >
> > Hay Dave B, Thanks for sending me some of your snow, but I really didn't
> > want the wind! What do I expect for free??
> >
> > The Dodge did not have an engine or tranny , but it had been a colume 
> > shift
> > 3 speed. I would guess a 318 engine as I did not have to change the K 
> > frame
> > to put in a big block. The Sport Fury has a later 60's 383 engine and
> > tranny. With the car, I got a dis-assembled 383 that I was told had a
> > correct casting number block
> > Also two other 727 tranny and another for parts. That is why my poor 
> > little
> > Chebby 1/2 ton 305 C.I. pickup is squatting so much in the pics! I also 
> > got
> > the stock console and bucket seats. If I keep the car, I will need a cable
> > shift 727. ................MO
> > {Steve Mick}
> > http://stevemick1964dodge.shutterfly.com/
> >
> > ----- Original Message ----- 
> > From: "David Bailey" <bb64d440@xxxxxxxxxxx>
> > To: <1962to1965mopars@xxxxxxxxxx>
> > Sent: Tuesday, February 01, 2011 7:01 AM
> > Subject: RE: Fury update
> >
> >
> > >
> > >
> > >
> > > Steve, congratulations on your accruement! Must be nice to have both the
> > > Dodge and Plymouth in 1964 vintage. And both as two door hard tops! Are
> > > they both 383 motors?
> > > Have fun and good luck with them!
> > >
> > > Dave Bailey
> > > '64 Dodge B-body 440, 2dr ht, 383 cid, 4 bbl
> > > 4 spd, '64 Sure-Grip rear axle, duel exh
> > > ZZW - Anniversary Gold w/ white side sweep
> > > In restoration to - as stock original (So far)
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >> To: 1962to1965mopars@xxxxxxxxxx
> > >> From: micher@xxxxxxxxxxxxxxx
> > >> Subject: Fury update
> > >> Date: Tue, 1 Feb 2011 01:01:32 -0600
> > >>
> > >>
> > >> Tonight we got some pics up on shutterfly--joining the Dudge Click on 
> > >> the
> > >> link below my name below. It needs to be re-arranged as it starts off
> > >> with
> > >> the Dodge 1st pic.
> > >>
> > >> I made room in the shop and got the Fury inside last week. Problem: It
> > >> would
> > >> not start but would fire when you let off the key, and sometimes when 
> > >> it
> > >> fired it would start up. And then it ran fine. I don't care for the
> > >> electronic Mopar ignition( to many things that can go wrong. So I
> > >> eliminated
> > >> the orange box and put in a single points rebuilt distributo and got 
> > >> rid
> > >> of
> > >> a bunch of wires.Left the new looking MSD coil. Still wouldn't start.
> > >> Checked the ballast resistor and it had bright test light on both ends
> > >> WTF???? Then I learned that a ballast resistor doesn't drop voltage 
> > >> until
> > >> it warms up. Wouldn't start. Then I found out that the hot wire to the
> > >> ballast was not hot when the engine was cranking. AH- HAA! Ran a jumper
> > >> from
> > >> the battery to the input side of the ballast, and BANG--it started 
> > >> right
> > >> up.
> > >> Ran pretty rough, but after a while the engine quit and would not 
> > >> fire.??
> > >> I
> > >> had another good coil that did not need a ballast resistor and ran a
> > >> jumper
> > >> wire from the battery to the input sideof the coil.. That fixed the
> > >> quitting
> > >> problem, but it still ran rough. Checked over the REBUILT distributor 
> > >> and
> > >> found that the points were barely opening. Set the gap at .16 and now 
> > >> it
> > >> starts up right away and runs smooth Well smooth as the lumpy cam will
> > >> let
> > >> it!
> > >>
> > >> Today I got a real surprise. Got it up in the air on jackstands to 
> > >> check
> > >> out
> > >> the underside. Despite the rust you see in the pics, there is no rust 
> > >> in
> > >> the floors or inner rocker panels. I knew the frontend had been 
> > >> re-built,
> > >> but I thought he told me they mads the headers, Nope, the headers are
> > >> good
> > >> with no clearancing dents in them and fit real well. May have an issue
> > >> with
> > >> removing the full size starter It has a driveshaft loop and adjustable
> > >> pinion snubber. Something is a little funkey with the rear axle 
> > >> housing-
> > >> springs, That will need to be looked into. but it does have the big
> > >> finned
> > >> brakes on the back. I still have some things to do while it is up in 
> > >> the
> > >> air, than when weather permits, I will move Ms. Fury to another dry
> > >> building
> > >> and get back to Brutus( 64 Dodge.) I will have an update on it in a
> > >> cuppla
> > >> weeks
> > >>
> > >> List member Fred Pfaulp in AZ. fixed me up with most all of the Sport
> > >> Fury
> > >> emblems .etc. that I didn't have---Thanks Fred!
> > >>
> > >> Later.................MO
> > >>
> > >>
> > >> {Steve Mick}
> > >> http://stevemick1964dodge.shutterfly.com/
> > >>
> > >>
> > >> ----
> > >> Please address private mail -- mail of interest to only one person -- 
> > >> directly to that person. I.e., send parts/car transactions and
> > >> negotiations as well as other personal messages only to the intended
> > >> recipient, not to the Clubhouse public address. This practice will
> > >> protect your privacy, reduce the total volume of mail and fine tune the
> > >> content signal to Mopar topic. Thanks!
> > >>
> > >> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > >> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> > >> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> > >>
> > >>
> > >
> > > --
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > > ----
> > > Please address private mail -- mail of interest to only one person -- 
> > > directly to that person. I.e., send parts/car transactions and
> > > negotiations as well as other personal messages only to the intended
> > > recipient, not to the Clubhouse public address. This practice will 
> > > protect
> > > your privacy, reduce the total volume of mail and fine tune the content
> > > signal to Mopar topic. Thanks!
> > >
> > > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > > http://www.1962to1965mopar.ornocar.org/mletiq.html and
> > > http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> > >
> > >
> > >
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person -- 
> > directly to that person. I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will protect 
> > your privacy, reduce the total volume of mail and fine tune the content 
> > signal to Mopar topic. Thanks!
> >
> > 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> > http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> >
> >
> 
> --
> [Non-text portions of this message have been removed]
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person. I.e., send parts/car transactions and negotiations 
> as well as other personal messages only to the intended recipient, not to 
> the Clubhouse public address. This practice will protect your privacy, 
> reduce the total volume of mail and fine tune the content signal to Mopar 
> topic. Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> 
> ----
> Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 
> 
> 
> 
> 
 		 	   		  
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER