Re: vin numbers

[Gary Wilson <Gwwilson67@xxxxxxxxx>]

No IMB cars or build sheet.  Just trying to figure out what engine the car 
orginaily had.  It had no engine when I brought it.  Thanks for the info.  I 
will try and get pictures of the vin and the one on the door.;



----- Original Message ----
From: Jim Altemose <jaltemoose@xxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Thu, February 17, 2011 9:02:15 AM
Subject: Re: vin numbers

Gary,

Is there something in particular you're trying to confirm?
Do you have the build sheet or IBM card?

You can confirm the VIN either through Chrysler Historical, Galen
Govier, or if you're
looking to confirm a Max Wedge, you can get one of Darrel Davis's
books or have someone
look up the VIN.  I have his 63 book, not 64, but they list every Maxie VIN.

So how do you know the VIN is valid for the car?

On the radiator support is stamped a 10 digit number that will match
the IBM card and the broadcast sheet, if you have either of those.  If
you don't, Chrysler Historical can send you a copy for $45.

http://www.wpchryslermuseum.org/newsroom.do;jsessionid=721733B9737791EC63257F0735F3EAAF?id=390&mid=135

Chrysler LLC
Corporate Historical Collection
12501 Chrysler Fwy.
CIMS 410-11-21
Detroit, MI 48288 USA
Attn: Historical Information
E-mail: archives@xxxxxxxxxxxxxxxxxxxx
Fax: 313-252-2928

On the rear package shelf on the top side below the upholstering there
is the same number stamped that is on the radiator support.  The
number will be ten digits and some may look like letters, i.e, a 1 may
look like an I.  The first digit is year, the second plant, the next
four the schedule date and the last four the plant number.  On a 65
the third through fifth is the schedule date and the last five the
plant number.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco

On Wed, Feb 16, 2011 at 10:34 PM, Bill Watson <chrycoman@xxxxxxxxx> wrote:
> The VIN is stamped on a plate attached to the driver's side door hinge
> post.   Being an American Dodge V8 it should start with a "6" and be
> 10 numbers in length.  Canadian dodge V8 models started with "5".
>
> No idea what all those numbers mean.  Depends upon where they were
> located, stamped or written on the metal or stamped on a plate
> attached to the car.
>
> If the "6442149323" is the VIN -
>
> 6 - Dodge V8
> 4 - Polara 500
> 4 - 1964 model year
> 2 - Hamtramck, MI assembly plant
> 149323 - 49,323rd car off the B body line at Hamtramck
>
> Bill
> Toronto, ON
>
>
> On Wed, Feb 16, 2011 at 6:57 PM, Gary Wilson <Gwwilson67@xxxxxxxxx> wrote:
>> I need some numbers ran if someone can help.  From 1964 Dodge 500 Auto on
>> floor.  1234567890  52-25-63820-14  1210-0304642  6442149323      These were 
>in
>> the engine compartment.  These off of the door  3-36-638214-4  AZ01070021  
>Hope
>> I got it right.  Trying to make the car orginial.   Mopar413  Gary   Thanks 
>for
>> any help.
>>
>>
>>
>>
>