Re: '62 rear drums
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: '62 rear drums




the bleeder valve is for releasing air from the brake system, the problem  
is the drums are mounted to a hub that is on a tappered/keyed axle shaft,  
the problem has nothing to do with the brakes themselves other than the name 
of  some of the parts that need to be removed to access the wheel cylinder  
itself
 
 
In a message dated 3/12/2011 3:01:46 A.M. Central Standard Time,  
djohn14296@xxxxxxxxx writes:


OK,  but if the bleeder valve is broken, why isn't air being introduced 
into the  system. Sorry if it is a dumb question, but I was just thinking, 
maybe we are  missing the obvious? Drill out the bleeder valve?
DJ


--- On Fri,  3/11/11, 62pluckedchicken@xxxxxxxxx 
<62pluckedchicken@xxxxxxxxx>  wrote:

> From: 62pluckedchicken@xxxxxxxxx  <62pluckedchicken@xxxxxxxxx>
> Subject: RE: '62 rear drums
>  To: 1962to1965mopars@xxxxxxxxxx
> Date: Friday, March 11, 2011, 6:27  PM
> 
> without the bleeder valve it would be hard, if not
>  impossible to not 
> introduce air in the brake lines.. and unhooking  the line
> doesn't 
> account for any air in the wheel  cylinder


----
Please address private mail -- mail of interest to  only one person -- 
directly to that person.  I.e., send parts/car  transactions and negotiations as 
well as other personal messages only to the  intended recipient, not to the 
Clubhouse public address. This practice will  protect your privacy, reduce 
the total volume of mail and fine tune the  content signal to Mopar topic.  
Thanks!

1962 to 1965 Mopar  Clubhouse Discussion  Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and  
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.  




--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.