Re: Power to the new harness...battery charger
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Power to the new harness...battery charger




Butch,
Don't know if this is the "correct" way, but this is how I did "43" my Petty
Car. I built my own wiring harness from scratch. What I did was hook my
small battery charger to the battery terminals. Stated at the 2 amp setting,
4 amp then 6 amp settings. I checked everything that should be hot with out
the key on. After that test I turned on the ignition key and repeated the
procedure. Even at 2 amp you could see I was getting power to the gauges,
starter, etc. Not blowing any fuses or finding any hot wires, I hooked up
the battery and everything worked. Have had no problems since.
Ollie

-----Original Message----- From: Butch Edison
Sent: Monday, April 11, 2011 9:45 AM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: Power to the new harness...battery charger





Could you post more information on using a battery charger to test the wiring systems? Is the idea to either set the charger at a lower amperage than the battery or the alternator would put out, or do battery chargers do that automatically? I'm putting in all new harnesses in my 64 Sport Fury and would appreciate whatever advice you have. Do you hook the ground to the car body and the hot lead to the big red wire that feeds through the ammeter?

Thanks/Butch/Ferndale, WA




----- Original Message ----- From: "Ollie" <satellite1965@xxxxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Monday, April 11, 2011 6:08:52 AM
Subject: Re: Power to the new harness


You are correct, A battery charger is the way to go for the "first" test
Thanks for the pics
Ollie

-----Original Message----- From: MO ( Steve Mick)
Sent: Monday, April 11, 2011 1:05 AM
To: 1962to1965mopars@xxxxxxxxxx
Subject: Re: Power to the new harness


Thaks Mike for putting in the link to your project pics.  I really enjoy
looking at the journey of a Mopar done by a guy in his garage. Those befor
pics are good evidence that under something that looks good can be hidden
horrors.  I can certainly relate  to many of your pics as I work on my 64
Dodge.  I am very thankfull that my rust issues have been pretty minor. Your
pics and getting the 64 Fury running and out of the way has  got me revved
up to get back to my Dodge project ( pics at the link below my name here)
CARRY ON!....................MO
{Steve Mick}
http://stevemick1964dodge.shutterfly.com/pictures/5
----- Original Message ----- From: "Mike Phelps" <mikeph@xxxxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, April 08, 2011 8:23 AM
Subject: Power to the new harness



Hello all. I think I've got the engine all wired up. I've gone back and
forth and back again over the diagrams and I think i'm ready to put
power to it. When I restores my instrument panel I checked it by hooking
a battery charger to it and it worked well. Shouldn't the engine wiring
work the same? I just want to put power to it and make sure it dosn't
burn up. Then I'll feel like I can move on to the dash wiring. Any
thoughts?
BTW, if anyone is interested here is a link to an album of the
restoration process so far.
https://picasaweb.google.com/lh/sredir?uname=116989096452645998816&target=ALBUM&id=5592292251894953025&authkey=Gv1sRgCKnwtI_u85bRlwE&feat=email

I hope this link works, it's the first time I've posted it.

Mike Phelps
1965 Plymouth Belvedere II Convertible
361/727
2004 Hemi Ram Quad Cab
2004 Chrysler 300M 3.5HO
2004 PT Cruiser 2.4 Turbo


---- Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect
your privacy, reduce the total volume of mail and fine tune the content
signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.




---- Please address private mail -- mail of interest to only one person --
directly to that person.  I.e., send parts/car transactions and negotiations
as well as other personal messages only to the intended recipient, not to
the Clubhouse public address. This practice will protect your privacy,
reduce the total volume of mail and fine tune the content signal to Mopar
topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.


---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.




[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.