Re: Transmission surprise

[Gary Wilson <gwwilson70@xxxxxxxxx>]

Yes it can.  It is the band adjustment lever for 1 and 2sd .  Just
slip it back in place after backing off the adjustment on the side of
the trans, then tighten if back up.  Run it fairly tight then back off
until you have 1/4 play on the arm that goes to the severo . Should
work just fine.

On Mon, May 16, 2011 at 5:50 PM,  <pjlenn@xxxxxxxxx> wrote:
> I lost 2nd gear in my 727 right before it went into storage last
> fall.  Tonight I started he removal process.  When I removed the pan I
> found a piece of steel about 1" wide and 3" long with a small notch in
> each end.  I'm guessing this is related to my problem.  This piece was
> not damaged in any way, just laying loose in the pan.  Can anyone
> identify this piece?  And if it can be put back in place without
> removing the tranny could it possibly solve my problem?
>
> Paul Lennemann
> 63 Sport Fury 440/727
>
> --
> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
> To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
> For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.
>
>



-- 
Gwwilson

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.