Re: Wiper linkage arm help

[Gary Wilson <gwwilson70@xxxxxxxxx>]

Flip the thing that hold the arms on the motor to the over reverse of
what you have it.

On Tue, May 24, 2011 at 8:24 PM, Enzo Cremasco <csmopars@xxxxxxxxxx> wrote:
> Hello guys
> Could someone with a '63 dodge -single speed wiper motor
> check the orientaion of the linkage arms.
> the FSM shows the longer arm on the Driver side and they are stamped L & R
> but yet i cannot seem to get them fitted properly this way
> (of course the dash is completely installed including heater-
> It went together easily with the longer arm on the passenger side)
> but when I activate the motor (which spins clockwise) the wipers head for the engine bay.
> Any help muchly appreciated
> Enzo
>
> --
> You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
> To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
> For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.
>
>



-- 
Gwwilson

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.