Re: ball joints

[Jim Altemose <jaltemoose@xxxxxxxxx>]

Try Craig Stanley of Mobile Parts at (516) 485-1935.

- Jim
Jim Altemose, Long Island, NY
'63 Polara 500 (Max Wedge)
'63 Polara 500 (383)
'65 Belvedere I (Street Wedge)
'71 Bronco

On Thu, Jun 2, 2011 at 2:41 PM, Cory Rempel <cory_383@xxxxxxxxxxx> wrote:
> Ok here's my dilemma.  I can't seem to find ANYBODY who makes lower ball
> joints for C-bodies 65 and newer.  I would like to do the front end in my 65
> Polara.  And my buddy has been looking for years for a set for his 71 300.
> I thought he was kidding when he said he couldn't find any.  When I did some
> research into it I found out he was right.  I then checked for my car, just
> in case, and found out the same thing.  I then did some more poking around
> and found that all C-bodies 65 and newer magically no longer have lower ball
> joints.  Either that or all existing ball joints on these cars have suddenly
> become indestructible an thus there is no further need make them.
>
> Can anyone help me and my buddy.  Well more so my buddy.  My front end is
> still fairly strong.  Any help is, as always, greatly appreciated.
>
> Cory
> 65 Polara  440/727
>
> --
> You received this message because you are subscribed to the Google Groups
> "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
> To unsubscribe from this group, send email to
> 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
> For more options, visit this group at
> http://groups.google.com/group/1962to1965mopars?hl=en.
>

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.