Re: Pertronix 40,000 Volt Flame Thrower Coil

I asked him twice and he said the ignition side.

Ted

--- On Wed, 6/8/11, 62to65mopar@xxxxxxxxxxx <62to65mopar@xxxxxxxxxxx> wrote:

From: 62to65mopar@xxxxxxxxxxx <62to65mopar@xxxxxxxxxxx>
Subject: Re: Pertronix 40,000 Volt Flame Thrower Coil
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Date: Wednesday, June 8, 2011, 9:14 PM

Did he mean the "run" or "start" side of the ballast resister? Blue wire is typically run, brown is typically start.

Thanks.
Gary H.

> -------Original Message-------

>
> Thanks guy's for the suggestions.
>
> I spoke with Pertronix today. The tech told me that if I wanted to
> keep the ballast resistor, all that I would need to do is run the red
> wire from the Ignitor to the ignition side of the ballast resistor. He
> said that by doing that the system would still function with the
> ballast resistor.
>
> Next question, what side of the resistor is the ignition on looking at
> the firewall? Can everyone tell that I don't wrench too much?
>
> Thanks,
> Ted
> 65 Dodge Coronet 500

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxx.
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.