Re: pb blaster on wiring harness

[Jimmy Peavy <peaver63@xxxxxxxxxxxxxx>]

That'll cut it loose but it is hard on some plastics.
Dry's out the plastic, and makes it brittle.

Jimmy

On 6/11/2011 6:26 PM, 65 wrote:
> Brake clean?
>
>
>
> ----- Original Message ----- From: "neal zimmerman" 
> <neal.zimmerman@xxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxxxxxxxx>
> Sent: Saturday, June 11, 2011 4:15 PM
> Subject: pb blaster on wiring harness
>
>
> > OK, I was trying to get an underdash wiring harness out of a parts
> > car. I don't think it had ever been removed in 45 years, so the
> > connectors were tight and unyielding. I was afraid I was going to
> > break them, so I had no choice but to douse each connector with a good
> > shot of PB Blaster. It worked, it came out lickety-split, but now I
> > have an oily harness that will smell up the car when I install it. So
> > NOW I need to remove all that PB blaster. What can I use that wont
> > hurt the plastic wirings or connectors?? I know many things that will
> > cut the PB blaster, but I am afraid it will hurt the harness. Its a
> > really nice harness too and I dont want to damage it in any way
> >  neal zimmerman, eugene oregon
> >
> > --
> > You received this message because you are subscribed to the Google 
> > Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
> > To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
> > To unsubscribe from this group, send email to 
> > 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
> > For more options, visit this group at 
> > http://groups.google.com/group/1962to1965mopars?hl=en.

--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.