Re: pb blaster on wiring harness

[doug daniel <dougdaniel50@xxxxxxxxx>]

i would say leave it alone and let it dry ,,,i should be ok ,,,

--- On Sat, 6/11/11, neal zimmerman <neal.zimmerman@xxxxxxxxx> wrote:

> From: neal zimmerman <neal.zimmerman@xxxxxxxxx>
> Subject: pb blaster on wiring harness
> To: 1962to1965mopars@xxxxxxxxxxxxxxxx
> Date: Saturday, June 11, 2011, 7:15 PM
> OK, I was trying to get an underdash
> wiring harness out of a parts
> car. I don't think it had ever been removed in 45 years, so
> the
> connectors were tight and unyielding. I was afraid I was
> going to
> break them, so I had no choice but to douse each connector
> with a good
> shot of PB Blaster. It worked, it came out lickety-split,
> but now I
> have an oily harness that will smell up the car when I
> install it. So
> NOW I need to remove all that PB blaster. What can I use
> that wont
> hurt the plastic wirings or connectors?? I know many things
> that will
> cut the PB blaster, but I am afraid it will hurt the
> harness. Its a
> really nice harness too and I dont want to damage it in any
> way
>   neal zimmerman, eugene oregon
> 
> -- 
> You received this message because you are subscribed to the
> Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse"
> group.
> To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
> To unsubscribe from this group, send email to
> 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
> For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.
> 
> 

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.